The composition of the flyboard® will continue to evolve and improve. We make every effort to keep the information on this page up-to-date and all specs have been provided by Zapata Racings Official Press Kit.
ZAPATA RACING FLYBOARD® PRO SERIES
Truly a next generation product from ZR here we will share with you a few tutorial videos created by our friends at Aquatic Aviation. Also, for more pictures and information read our recent article Flyboard Pro Series.
HOW TO ADJUST THE NOZZLES ON THE 2015 PRO SERIES FLYBOARD
HOW TO ADJUST THE 2015 PRO SERIES FLYBOARD STOP PINS
ZAPATA RACING FLYBOARD® LEGEND
Below are the 2014 Flyboard Kits and Parts. Ask your local authorized dealer to hook you up.
2014 FLYBOARD DECK
The Flyboard® Deck remains the same for 2014 with new more durable graphics. The Deck fits as a replacement on the 2013 v2 version as well.
NEW ZAPATA RACING BINDINGS designed especially for use with the Flyboard®. These new bindings position the rider in the optimum position for flying and incorporate a stronger front to back support system and a softer side to side feel for greater comfort and performance. The bindings are available in M (6-12) and L (9-15) men’s shoe size.
2014 FLYBOARD ‘Y’ CONNECTOR
The “Y” Connector has been modified for 2014. The Index Finger has been moved to the collar above the Hose Swivel to minimize the potential for damage. Works with both v2 and v3 Flyboards.
2014 FLYBOARD ELBOW UNIT
Perhaps one of the most aggressive improvements has been to the Elbow Unit. There is a new discharge port on the back of the “U” Pipe to allow for increased forward speed while doing certain tricks and maneuvers. The 1.5″ female threaded opening allows for the installation of a manual or low voltage electric valve that can be opened or closed as desired.
2014 FLYBOARD PUMP INTERFACE PLATE
The new Pump Interface Plate is beefier for 2014 and features an integrated venturi port designed to siphon any water from inside your PWC. In addition, the bolt and adapter kits have also been modified for the new 2014 Flyboard®.
2014 v3 Pro Rider Flyboard Kit. This is the Official Zapata Racing Pro-Rider Flyboard Kit. The new v3 model features new Bindings that have been specially designed and engineered for the Flyboard to provide rigid forward and back stability while allowing for a “softer” feel from side to side. In order to purchase this item, you must complete a Flyboard Training and Safety Course administered by us or an Authorized Flyboard Instructor. Call for complete details.
What’s Included in the Kit:
- Flyboard Deck
- Equipped “Y” Connector
- 60″ Main Supply Hose
- Equipped Elbow Connector
- Universal Pump Interface
- Hose Strap
- Connection Strap
- Quick Connect Hose Swivel
- Main Hose Clamps
- All necessary assembly hardware
- Pro-Rider Plugs
- Zapata Racing Pro-Rider Bindings
You will need to purchase an adapter mounting kit for your particular PWC.
ELECTRONIC MANAGEMENT KIT 2014 (optional)
- 1 RIGHT HAND TRIGGER AND START/STOP SWITCH which sends a signal to an electronic card in the PWC
- 1 ELECTRIC CABLE links with the electronic card
- 1 ELECTRONIC SYSTEM composed of a learning mode which manages power
- 1 ELECTRICAL MOTOR (inside the electric box)
- 1 ACCELERATOR CABLE (which links the electrical motor and throttle body)
To be delivered according to the WNM: (Additional: ask your dealer for the price)
- 1 ELECTRIC BEAM to connect the PWC (start/stop, cut out box)
- 1 ADAPTER PLATE which is different according to the PWC model which allows adaptation between PWC and the nozzle
Electronic Management Kit (EMK) for 2013 v2 and 2014 v3 Pro-Rider Flyboard. Specifically designed for use with the Pro-Rider Configuration without the Arm Stabilizers. This Kit can be adapted for use with the 2012 v1 Flyboard® with the use of part FB02130.
ZAPATA RACING WIRELESS EMK INSTALLATION
QUICK NOZZLE ADAPTER (optional)
The Quick nozzle allows to change the PWC direction system into a Flyboard utilization in less than 30 seconds.
Dual Drive Impellers feature the latest advancements in technology and are specifically designed for use with the Flyboard®. The polished stainless steel four-blade main impeller has been fitted with a special inducer that will dramatically increase performance while reducing fuel consumption by as much as 40%. With our new dual drive impellers, you will reach heights never before achieved with a stock impeller. These are the same impellers used by Pro Flyboarders in major competitions.
Speak with your local authorized dealer about dual impellers that will work with your personal watercraft.
All the spare parts are under a 1 year warranty.
While the Flyboard requires very low maintenance, we still advise a clear water cleaning after any use at sea.
• The Flyboard is compatible with all brands of PWC with a minimum of 100HP – (150HP recommended).
• All purchasers of the Flyboard are required to complete a course on how to operate the Flyboard.